In this tutorial, I’m going to show you how to draw 6 different eye shapes: almond, round, monolid, hooded, upturned and downturned.
You’ll get a chance to look at different types of eyes being drawn at the same time. I don’t encourage you to draw them all at once, so pick only one and follow it throughout the tutorial.
Feel free to mix and match as you get comfortable on your next run-through.
Since I couldn’t fit all 6 eyes in every step, the last 2 have been pushed into a bonus section at the end of the article.
Click the following link and hit the download button beside the printer icon to download the PDF: RapidFireArt Tutorials – How to Draw Different Eye Shapes
Step 1: Draw a Circle
Using an HB pencil, let’s start by drawing a circle. This circle represents the eyeball.
Step 2: Pick an Angle
How slanted do you want the eye to be? Draw a line going through the circle with the angle you prefer. Feel free to deviate from the examples above.
Note: the left side of each circle is the inner side of the eye
This method is awesome if you’re drawing a set of eyes on the same face.
Step 3: Draw the Inner Corner of the Eye
Time to draw the inner corner of the eye. You can use several shapes. Angular, pointy or rounded ones like the examples above and in the bonus section. For small or shallow corners, stay very close to the circle. For deep and large corners, place it well outside the circle.
Step 4: Draw the Top Lid
Draw the upper eyelid while staying within the boundary of the circle. Imagine that the eyelid is wrapping around a sphere. The last example shows the right side of the lid wrapping around the eyeball with a big steep curve.
For almond shaped eyes, you’ll want to stick to a slim football shaped curve and the deepest part of the arc should be located at the middle of the lid.
Step 5: Draw the Bottom Lid
Now draw the lower lid. Make sure to draw a slight bump near the inner corner of the eye and avoid drawing the lid too far away from the line you created in step 2.
For almond shaped eyes, the arc of the top and bottom lids are very closely aligned vertically.
Step 6: Add a Crease
Draw the fold above the eye starting from the inner corner and working your way out. The thicker the space between this line and the eye, the thicker the fold will look. You can loosely mimic the curve of the top lid.
This crease should not go past the line you created in step 2 unless you’re drawing wrinkles.
For the hooded eye, you’ll want to bring the crease as close to the top lid as possible. You can even overlap them or cut through a portion of the top lid.
When drawing the crease, keep your lines fairly light. A dark crease will look really deep.
Step 7: Erase Outlines
Carefully erase your outlines. I used a hard tombow eraser to save time.
Step 8: Add Some Details
At the inner corner of the eye, draw a curve or two to separate the eyeball from the soft pink caruncula.
For Iris sizing, a good rule of thumb is for the iris to take up about 2/4’s of the eyeball (horizontally). Examples below:
If you want to draw a perfectly shaped iris, draw a full circle and then erase parts of the circle that go outside of the eyeball. This step should be done very lightly. Once you have the position and size you want, darken the iris outline.
Step 9: Shade Your Eye
To shade and add more details, you can refer to the tutorials below:
- How to draw an eye
- How to shade an eyeball
- How to draw eyelashes
- How to draw eyebrows
- How to shade a face
Monolid: You can draw a monolid eye by excluding the crease or giving a small hint of it at the end of the eye.
Downturned: Try not to angle your line too much when drawing downturned eyes. In fact, the one I drew is pretty extreme already. Actually, you know what? Just do what you feel like. Experiment and have fun!
I hope you got a lot of value out of this tutorial! If you didn’t, let me know why in the comments below and I’ll do my best to make it right for you.
And as always, if you enjoyed this tutorial, please share it with your friends using the buttons below.
If you love RapidFireArt tutorials and want to support what I do, check out my Patreon page where you can support RFA and earn cool rewards at the same time!